Garden & Landscaping
589 sources in the library on garden & landscaping. Each one says what the document covers and what it is good for. Name a source to see which document it is and where to read it. One at a time. Page 15 of 15.
- supplier figure RN-RPDNZT
K Rend (Kilwaughter Minerals)
Ready to use organic resin thin coat render with silicone resin emulsion and acrylic dispersion, supplied in 25 kg buckets. Coverage by grain size: TC 05 (largest grain 0.5 mm) about 16 m2 per 25 kg bucket or 1.6 kg/m2 by hand and about 20 m2 or 1.3 kg/m2 sprayed; TC 10 (1.0 mm) about 14 m2 or 1.8 kg/m2; TC 15 (1.5 mm) about 10 m2 or 2.5 kg/m2; TC 30 (3.0 mm) about 5 m2 or 5 kg/m2. Classified to BS EN 15824: 2009: water vapour permeability Category V2, water absorption Category W3, adhesion 0.65 MPa, thermal conductivity lambda10 dry 0.83 (P=50%) and 0.93 (P=90%), density approximately 1,800 kg/m3, designation Coating Material DIN 18558 P Org 1. Reaction to fire Class A2-s1,d0. Substrate and air minimum 5 C at application; allow freshly applied basecoats a minimum of 14 days; prime with K Rend Primer TC and allow 24 hours.
- supplier figure RN-1TK34V
Kent Hire
Kent Hire's hire page for an electric lawn scarifier, giving its hire rates by number of days, excluding VAT.
- supplier figure RN-FQQUOX
London Stone (UK) Ltd
the retail price London Stone (UK) Ltd publishes for Composite Decking, which is the supply figure the cost book records for this item
- supplier figure RN-RUM3X7
London Stone (UK) Ltd
London Stone product page for its DesignBoard composite decking in the Luna colour, 3600 x 150 x 20 mm boards, priced by the square metre including VAT. It settles what one specialist supplier charges per m² for a premium composite board, supply only.
- supplier figure RN-FVJ4DI
London Stone (UK) Ltd
London Stone product page for its brushed composite decking in Warm Teak, 3600 x 150 x 25 mm boards, priced by the square metre including VAT. It settles what one specialist supplier charges per m² for an entry-level composite board, supply only.
- supplier figure RN-J2M65L
Marley Ltd
Marley western red cedar shingles: 400mm long with random widths 75mm to 350mm, 10mm thick at the butt tapering, minimum pitch 14 degrees, fixed to 38mm battens. Gauge, coverage and laid weight change sharply with pitch. At 75-90 degrees (vertical cladding) maximum gauge 175mm, 3.20 m2 covered per bundle, laid weight 4.0 kg/m2, 5.3 lin.m/m2 of battens. At 22-74 degrees maximum gauge 125mm, 2.28 m2 per bundle, 6.1 kg/m2, 8.0 lin.m/m2 of battens. At 14-21 degrees maximum gauge 95mm, only 1.73 m2 per bundle, 8.1 kg/m2, 10.5 lin.m/m2 of battens. Dropping from a 30 degree roof to a 15 degree roof therefore costs roughly a third more shingles and battens.
- supplier figure RN-A5O3ET
Marshalls
Marshalls' homeowner-level version of its installation guidance, giving the same build-up in plainer numbers. Excavate 150mm across the whole patio area over evenly compacted soil. Lay and compact a sub-base to a consistent 100mm depth, smooth, flat and firm. Mix a bedding of three parts sharp sand to one part cement, wetted to a doughy consistency, and spread it as an even 40mm layer. Dampen each slab before laying so it does not draw water out of the mix too quickly, then bed it down with a rubber mallet so it sits about 15mm into the mortar, leaving 10 to 15mm joints between slabs. Leave the patio to set for at least 24 hours before pointing or any finishing work. Read alongside the fuller Marshalls Installation Guidelines for Concrete Paving, which adds the two constraints this page omits: the 150mm minimum drop below the damp proof course where the paving abuts a building, and the 6m movement joint spacing.
- supplier figure RN-QETFEN
Marshalls
Marshalls' manufacturer installation specification for concrete paving, Issue 8, January 2023, and the document to quote when a contractor's method is in dispute. Sub-base: a minimum of 100mm for most domestic applications, using well graded 40mm-to-dust Type 1 material, placed in layers not exceeding 75mm, finished to plus 5 / minus 10mm of specified levels; recycled crushed masonry or concrete is acceptable. The finished paving surface, where laid up to an existing structure, must be a minimum of 150mm below the damp proof course to prevent rising damp - the single most commonly ignored figure in domestic patio work. Movement joints at 6m centres where the area is in prolonged direct sunlight, is a large open expanse, or uses a dark colour. Edge restraints go in before the sub-base and must give a consistent vertical face to below the laying course. Rigid laying: a full wet workable mortar bed of 1 part cement to 3 or 4 parts sharp sand, laid 30 to 40mm thick, reducing to about 25mm after tamping; back-priming the units is advised. Joints: minimum 10mm with units at least 22mm thick, filled with a damp mortar of 1 part cement to 4 parts building sand, or a proprietary jointing compound. Dry or semi-dry brushed-in sand/cement mixes must never be used, and butt jointing is not recommended.
- supplier figure RN-WZ1UX9
Marshalls
Atlas textured concrete paving, offered as a cost alternative to natural granite in three neutral grey tones. Five plan sizes in two depths, 60 mm and 80 mm, listed against length, width, thickness, approximate unit weight and approximate pack weight per colourway (St Ives, Eaglescliffe and a third grey). Suitable for pedestrian, light and commercial trafficked areas. Selected sizes are also made as Atlas Priora permeable. Marshalls note maximum loading suitability varies by size and depends on install method, bond pattern and sub-base design.
- supplier figure RN-4FQVCR
Marshalls
Modal X Priora permeable concrete paving. Available in a textured finish, eight colours, seven plan sizes, in 60 mm or 80 mm depth, plus three complementary sett sizes in a riven texture. Nibs on the edges of each unit let water drain into the joints and into a prepared sub-base, then to ground or a controlled release to drain, removing the need for point drainage. Marshalls state the edge detail lets units be laid in any direction while still achieving 40% more interlock than standard paving. Example unit: Modal X Pro Priora Textured Riven 240 x 160 x 80 mm, approximate unit weight 8 kg, pack weight 1516 kg, made to order. Marshalls flag that maximum loading suitability does not apply to every size and depends on the install method, bond pattern and sub-base design. A non-permeable version of the same range is available.
- supplier figure RN-ZKZNEQ
Polypipe
Cell data. Polystorm Lite, product code PSM2, 1 m x 0.5 m x 0.4 m high, unit weight 7 kg, cube storage volume 0.19 m3 or 190 litres, surface area 55% perforated, maximum compressive strength 20 tonnes per square metre, 15 cells per pallet. Polystorm, product code PSM1, same 1 m x 0.5 m x 0.4 m size, unit weight 9 kg, storage volume 0.19 m3 or 190 litres, maximum compressive strength 40 tonnes per square metre, 15 per pallet. The range is designed to a 95% void ratio and spans 20 to 80 tonnes per square metre load bearing capacity. Ancillaries include a basic silt trap PSMST160, an advanced 15 litres/sec silt trap PSMSTA160/15, round cover and frame UG501, square UG502, 450 mm silt trap lid and frame UG512 and a 460 mm lockable plastic cover and frame UG511.
- supplier figure RN-S5DFMS
Polypipe Civils and Green Urbanisation
Polystorm geocellular range for retention, attenuation and infiltration. Headline figures: 95% void ratio compared with traditional aggregate, load bearing strength from 20 to 83 tonnes/m2 across the range, 60 plus years design life, 100% recyclable. Variants listed are Polystorm R, Access, Inspect, Deep, Xtra, Biomat, Catchpit, Silt Trap, Low-Flow Control Unit and accessories, with the deeper units aimed at greater burial depths.
- supplier figure RN-OUBPDR
Resin Mill
the retail price Resin Mill publishes for Nordic Grey Resin Bonded PRO 1-3mm, which is the supply figure the cost book records for this item. Re-sourced from a category listing so the page a reader opens is the product that was priced
- supplier figure RN-JUXINI
RHS Plants
RHS Plants' retail product page for a 1 mm, 69 cm high bamboo root barrier sold by the 5 m and 10 m roll, with the price of each length.
- supplier figure RN-6C5V36
Ronseal
Manufacturer coverage and method data for an exterior wood paint. Coverage is up to 12 m2 per litre, double the 6 m2 per litre of the same maker's fence treatment because the substrate is planed rather than sawn. It is touch dry in one hour with four hours between coats. No primer is required. Ronseal's stated preparation rule is 240 grit for a light sand where the old paint is sound, and 120 grit where the paint is cracked or flaking. The protection claim is 10 years.
- supplier figure RN-BXNLP8
Ronseal
Manufacturer application data for Ronseal Fence Life Plus. Coverage is up to 6 m2 per litre, far lower than an interior emulsion, which is the number to use when estimating for a rough sawn fence. Ronseal states the treatment lasts up to 5 years. It cannot be applied in the rain and needs a warm dry day with temperatures above 10C, since cold weather stops it drying properly and it can wash off. The manufacturer instruction is to overlap each pass by 50 per cent for proper coverage.
- supplier figure RN-OZF7XJ
Ronseal
Manufacturer data for a water based decking oil. Coverage is 6.4 m2 per litre. It is rainproof in 90 minutes and touch dry in 90 minutes, with four hours before a second coat. Ronseal states it stops the deck turning grey or splitting. The application instruction is to start in the furthest corner and brush along the length of the boards, working 3 to 4 boards at a time to avoid overlap marks, which is the technique that prevents visible lap lines on a deck.
- supplier figure RN-ZIVJ9D
Russwood
Home grown Scottish larch cladding. Density medium, classified by BS EN 350-2 at approximately 556 kg/m3 at a moisture content of approximately 18%. Natural durability Class 3 to BS EN 350-2, improved by grading that removes non durable sapwood from the working face; live knots only up to 50 mm diameter, boards sapwood free on exposed faces. Standard profiles include RW102 and RW014 at 25 mm thickness in 66 mm and 140 mm standard widths, intended for board on board and other simple face fixed arrangements and not recommended for tongue and groove or secret fixing.
- supplier figure RN-O8ORQZ
Smiths Hire
Smiths Hire's hire page for a 400 mm heavy duty electric lawn scarifier, giving its hire rate per unit excluding VAT.
- supplier figure RN-9QSGK5
Speedy Hire
Speedy Hire's page for a 320 mm petrol plate compactor, hired at £27.01 ex VAT for the first day (about £32 with VAT), which supports a day rate in the £30 to £50 range.
- supplier figure RN-TQ48SK
Sunsquare Ltd
Sunsquare skylight range, made in Bury St Edmunds. SkyView rooflight: U-values as low as 0.5 W/m2K, non-fragile glazing tested to ACR[M]001:2014, electric ventilation options; a fire-rated SkyView with CERTIFIRE certification is also offered. Horizon external walk-on glass roof panels for terraces: load capacities up to 5.0 kN/m2 uniformly distributed and 4.5 kN concentrated, U-value 0.94 W/m2K. Internal walk-on floorlights: anti-slip glass to British standards for wet areas, U-values as low as 0.5 W/m2K, 99% UV filtering. Pyramid multi-pane roof lantern: from GBP 1,198 excluding VAT, standard sizes from 800 x 800mm, slim aluminium frame, U-values as low as 0.5 W/m2K, 10 year frame warranty, optional self-cleaning glass. Aero electric roof access rooflight opens fully to 90 degrees; Aero Pyramid opens to 30 degrees.
- supplier figure RN-HJRKJO
Swisspearl (formerly Cembrit)
Swisspearl B5 fibre cement corrugated roofing sheet, the modern replacement for 3 inch corrugated sheets on older garages and equine buildings. Sheet thickness 6mm, cover width 1020mm, average weight 11.7 kg/m2. Twelve lengths from 4 ft 6 in to 10 ft 6 in, with matching translucent sheets for daylight. Available uncoated natural grey or in 6 colours using a 3-part painting process. Ridges, bargeboards, finials, fixings and eaves fillers complete the range.
- supplier figure RN-B7B38R
Swisspearl (formerly Cembrit)
Swisspearl B7 fibre cement corrugated roofing sheet: 6mm thick, 1150mm wide, in FS, CO, HO and PCO variants, average weight 13.4 kg/m2, noticeably heavier per square metre than the smaller-profile B5 at 11.7 kg/m2. Usable as roofing or as part of a ventilated facade, with reinforcement strips, mitred corners and pre-punched holes available on some types.
- supplier figure RN-G11A2A
Swisspearl (formerly Cembrit)
Swisspearl Cemsix corrugated fibre cement sheet: 6mm thick, 1086mm width, multiple lengths, available in natural grey or 4 colours from a 3-part colouring process (7 colours quoted for the coated range). The whole Swisspearl system is covered by BBA Agrement Certificate 03/4049 and is guaranteed for 30 years durability and 10 years colour stability.
- supplier figure RN-TSD9GT
Tiger Sheds (Woodlands Home and Garden Group Limited)
The supplier's terms for its pro-install service: installation is offered only in the postcode areas on its coverage maps, takes place on a separate visit after delivery, and needs a firm, level and accessible base in place beforehand or the visit is aborted.
- supplier figure RN-0IB01X
Toolstation
Toolstation's retail product page prices one Bulldog Springbok spring tine lawn rake with its handle, alongside the earlier price of the same rake.
- supplier figure RN-HKFQUC
Toolstation
Toolstation product page for a 1.75 kg box of Turfline hard-wearing grass seed at £19.49 including VAT, which is about £11.14 per kg, the top of the range.
- supplier figure RN-NFZ9N9
Toolstation
Toolstation product page for a 20 kg bag of Turfline hard-wearing grass seed at £119.99 including VAT, which is £6.00 per kg, the low end of the range.
- secondary RN-NW5VN7
Trade2Base
A trade software firm's June 2026 guide for landscaping businesses on what to charge: landscaper day rates by UK region and by specialism, and the design fee garden designers typically charge for a full garden scheme. Guidance to the trade, not a contractor's own price.