Windows, Doors & Glazing
196 sources in the library on windows, doors & glazing. Each one says what the document covers and what it is good for. Name a source to see which document it is and where to read it. One at a time. Page 4 of 5.
- supplier figure RN-Y4F6J0
Glazing Vision Ltd
Glazing Vision Flushglaze circular rooflight. Tested to air permeability EN 12207 Class 4 at +600 Pa and water tightness EN 12208 Class 9A at 600 Pa; minimum recommended pitch 5 degrees for standard units. Security: tested to LPS 2081 Issue 1:2015, approved by the Loss Prevention Certification Board (Cert/LPCB reference 1347a) and Secured by Design. Security Rating A requires an inner pane of at least 8.8mm PVB laminated glass (two 4mm panes with a 0.8mm PVB interlayer); Security Rating B requires at least 9.5mm ionomer laminated glass (two 4mm panes with a 1.5mm ionomer interlayer).
- supplier figure RN-BXFQVE
Glazing Vision Ltd
Glazing Vision Flushglaze fire rated rooflight: minimum upstand pitch 3 degrees, maximum 10 degrees, with at least 5 degrees recommended for standard units, so it is a flat-roof-only product unlike the standard Flushglaze which goes to 70 degrees. Structural integrity verified by finite element analysis and testing.
- supplier figure RN-FBXCAS
Glazing Vision Ltd
Glazing Vision fixed roof window for pitched roofs: span 300mm to 3000mm. Tested to air permeability EN 12207 Class 4 at plus/minus 750 Pa, watertightness EN 12208 Class E750 at 750 Pa, and wind resistance EN 12210 Class E2400 at plus/minus 2400 Pa serviceability and plus/minus 3600 Pa safety.
- supplier figure RN-F361VU
Glazing Vision Ltd
Glazing Vision Flushglaze Eaves rooflight, a fixed rooflight designed to run out to the edge of a flat roof: width 400mm to 2000mm.
- supplier figure RN-VN6FVL
Glazing Vision Ltd
Glazing Vision Flushglaze fixed rooflight. Span from 400mm to 8626mm and width 400mm to 8626mm. Minimum upstand pitch 3 degrees, maximum 70 degrees, with at least 5 degrees recommended for standard units (above 70 degrees a roof window is needed instead). Tested at 2000mm span x 2500mm width at 0 degrees pitch: air permeability EN 12207 Class 4 at +600 Pa, water tightness EN 12208 Class 9A at 600 Pa. Security Rating A requires an inner pane of at least 8.8mm PVB laminated glass (two 4mm panes with a 0.8mm PVB interlayer); Security Rating B requires at least 9.5mm ionomer laminated glass (two 4mm panes with a 1.5mm ionomer interlayer). Structural performance verified by finite element analysis and testing.
- supplier figure RN-5BPXPN
Glazing Vision Ltd
Glazing Vision Flushglaze Multi-Part rooflight, which links panels for large openings: span 400mm to 4131mm. Minimum upstand pitch 3 degrees, maximum 70 degrees, at least 5 degrees recommended. Air permeability EN 12207 Class 4 at +600 Pa, water tightness EN 12208 Class 9A at 600 Pa. Tested to LPS 2081 Issue 1:2015, approved by the Loss Prevention Certification Board (Cert/LPCB reference 1347a) and Secured by Design.
- supplier figure RN-E1RXPB
Glazing Vision Ltd
Glazing Vision Flushglaze Walk On rooflight, toughened laminated glass designed for regular foot traffic in UK domestic use, tested to uniform loading of 1.5 kN/m2 and concentrated loading of 2.0 kN in accordance with EN 1991-1-1:2002. Span and width both 400mm to 8626mm. Minimum upstand pitch 1 degree (recommended pitch 1 degree for standard units), maximum 70 degrees. Tested at 2000 x 2500mm at 0 degrees: air permeability EN 12207 Class 4 at +600 Pa, water tightness EN 12208 Class 9A at 600 Pa. Security Rating A needs an inner pane of at least 8.8mm PVB laminated glass; Rating B needs at least 9.5mm ionomer laminated glass.
- supplier figure RN-58CW09
Glazing Vision Ltd
Glazing Vision Flushglaze Wall Abutted rooflight, designed to run up to and against a wall: span 400mm to 4131mm. Minimum upstand pitch 3 degrees, maximum 70 degrees, at least 5 degrees recommended for standard units. Security Rating A requires an inner pane of at least 8.8mm PVB laminated glass (two 4mm panes with a 0.8mm PVB interlayer); Rating B requires at least 9.5mm ionomer laminated glass (two 4mm panes with a 1.5mm ionomer interlayer).
- supplier figure RN-Z28L29
Glazing Vision Ltd
Glazing Vision free-standing SkyBox rooflight: span 1300mm to 3500mm, upstand pitch 0 degrees minimum and maximum. Tested to air permeability EN 12207 Class 2 at plus/minus 300 Pa, watertightness EN 12208 Class 7A at 300 Pa, and wind resistance EN 12210 Class C3 at +2400/-1200 Pa serviceability and +3200/-1250 Pa safety. Note these classes are lower than the flat Flushglaze range (Class 4 at 600 Pa, Class 9A at 600 Pa), which matters on exposed sites. Each unit is internally weather tested to BS EN 12207 before delivery.
- supplier figure RN-UQ96V5
Glazing Vision Ltd
Glazing Vision internal walk-on rooflight, installed flush with the floor finish: span 400mm to 4000mm, upstand pitch 0 degrees minimum and maximum. Standard glass specification withstands regular foot traffic in UK domestic use with a uniformly distributed load of 1.50 kN/m2 and a concentrated load of 2.00 kN applied over a 50 x 50mm square, in accordance with BS EN 1991-1-1:2002. A range of anti-slip finishes is available. Approved by the BBA, with QualiCoat approved aluminium framework.
- supplier figure RN-H8WZLL
Glazing Vision Ltd
Glazing Vision lantern rooflight: span 600mm to 1500mm, width 650mm to 2500mm. Minimum and maximum upstand pitch both 0 degrees, meaning the lantern sits on a level upstand and sheds water through its own pitched form rather than through a sloping kerb. Thermally broken framework, optional easy clean coating and trickle vents.
- supplier figure RN-3R6F6U
Glazing Vision Ltd
Glazing Vision PitchGlaze conservation roof window: width 300mm to 3000mm. Tested performance: air permeability EN 12207 Class 4 at plus/minus 750 Pa; watertightness EN 12208 Class E750 at 750 Pa; wind resistance EN 12210 Class E2400, plus/minus 2400 Pa serviceability and plus/minus 3600 Pa safety. Note the higher test pressures than the flat Flushglaze rooflight, which is tested to Class 4 at 600 Pa and Class 9A at 600 Pa.
- supplier figure RN-T3Q9X3
Glazing Vision Ltd
Glazing Vision PitchRidge roof window, a ridge unit for pitched roofs: span 110mm to 4085mm on each side. Tested to air permeability EN 12207 Class 4 at plus/minus 750 Pa, watertightness EN 12208 Class E750 at 750 Pa, and wind resistance EN 12210 Class E2400 at plus/minus 2400 Pa serviceability and plus/minus 3600 Pa safety, the same higher-pressure regime as the other pitched roof windows in the range.
- supplier figure RN-CI1C4U
Glazing Vision Ltd
Glazing Vision PitchVent opening roof window for pitched roofs. Two size ranges are published: span 800mm to 1500mm for one variant and 800mm to 3000mm for the other.
- supplier figure RN-9PQ8KE
Glazing Vision Ltd
Glazing Vision RidgeGlaze fixed rooflight, a two-sided ridge unit: span 500mm to 3000mm on each side. Minimum upstand pitch 10 degrees and maximum 50 degrees, a much steeper range than the flat Flushglaze products which run from 1-3 degrees. Security Rating A requires an inner pane of at least 8.8mm PVB laminated glass; Rating B requires at least 9.5mm ionomer laminated glass.
- supplier figure RN-Q4TIZY
Glazing Vision Ltd
Glazing Vision SkyHatch roof access rooflight. Manual version: span fixed at 1100mm minimum and maximum. Electric SkyHatch: span 800mm to 1500mm, width 800mm to 2000mm. Minimum upstand pitch 3 degrees, maximum 10 degrees, with at least 5 degrees recommended for standard units.
- supplier figure RN-HYH0BT
Glazing Vision Ltd
Glazing Vision Sliding Over Fixed rooflight: minimum span 1300mm, maximum span 3100mm; minimum width 1500mm, maximum width 5000mm. Minimum upstand pitch 3 degrees, maximum upstand pitch 30 degrees, with at least 5 degrees recommended for standard units. Thermally broken framework; optional easy clean coating and remote control. Structural integrity verified by finite element analysis and testing.
- supplier figure RN-FIHCBY
Glazing Vision Ltd
Glazing Vision Sliding Over Roof rooflight: span 1100mm to 3100mm. Minimum upstand pitch 3 degrees, maximum 30 degrees, at least 5 degrees recommended for standard units. Thermally broken framework with special colour options.
- supplier figure RN-O8IU5B
Glazing Vision Ltd
Glazing Vision Three Wall Box rooflight: span 1100mm to 2400mm. Minimum and maximum upstand pitch both 0 degrees, so it is designed for a level upstand only.
- supplier figure RN-1D8Z71
Glazing Vision Ltd
Glazing Vision VisionVent hinged opening rooflight, available in three operation variants with a thermally broken framework. Standard version: span 415mm to 2365mm, minimum upstand pitch 3 degrees, maximum 70 degrees, with at least 5 degrees recommended. Chain-operated VisionVent: span 808mm to 2365mm.
- supplier figure RN-9Q5MDN
Glazing Vision Ltd
Glazing Vision X-Vent AOV (automatic opening vent) rooflight for smoke ventilation: span fixed at 1400mm minimum and maximum. Minimum upstand pitch 3 degrees, maximum 5 degrees, with at least 5 degrees recommended, so it demands a nearly flat kerb. Security Rating A requires an inner pane of at least 8.8mm PVB laminated glass; Rating B requires at least 9.5mm ionomer laminated glass.
- supplier figure RN-ARJD3I
Heaps, Arnold & Heaps Ltd
UK lead came manufacturer's size range, for came dimensions in leaded light and stained glass notes. Flat leaf came 3 mm to 25 mm face width (3/16 inch to 3/4 inch in imperial), oval or round leaf came 4 mm to 20 mm. Narrow heart came 3 mm to 4 mm, wide heart 6 mm to 7 mm. Profiles include flat, round, U, C and Y, narrow and wide heart, steel-reinforced, arrow/corner and suncatcher. Extruded at their UK facility, supplied in 1.8 m (6 ft) lengths or coils. NOTE: heapsarnold.com is not currently in the maker allowlist in scripts/quality/sources.mjs, so verify-notes.mjs rejects it until this row lands in the reference book.
- supplier figure RN-KFYJSE
IG Lintels (Keystone Group)
L1/HD 100 heavy duty lintel for 90-105 mm cavities, 102 mm outer leaf, 100 mm inner leaf. Total UDL by length band, quoted at 3:1 and 19:1 inner-to-outer load ratios: 600-1200 mm, 109 mm high, 2.9 mm steel, 30 kN and 22 kN; 1350-1500 mm, 136 mm high, 2.9 mm, 30 kN and 22 kN; 1650-2100 mm, 161 mm high, 2.9 mm, 40 kN and 35 kN; 2250-2550 mm, 199 mm high, 2.9 mm, 40 kN and 35 kN; 2700-3000 mm, 199 mm high, 3.2 mm, 40 kN and 35 kN.
- supplier figure RN-UQH4M2
IG Lintels (Keystone Group)
L1/S 100 standard load lintel for 90-105 mm cavities, 102 mm outer leaf, 100 mm inner leaf. Loading table by manufactured length: 600-1200 mm, 87 mm high, 1.6 mm steel, total UDL 12 kN at a 3:1 load ratio and 10 kN at 19:1; 1350-1500 mm, 87 mm high, 1.8 mm steel, 16 kN and 13 kN; 1650-1800 mm, 107 mm high, and so on up the range. Lengths are made in 150 mm increments.
- supplier figure RN-R96EYL
IG Lintels (Keystone Group)
L1/S 50, SKU SK50, standard load lintel for the narrow 50-65 mm cavities common in older housing, 102 mm outer leaf, 100 mm inner leaf. Loading table by manufactured length: 600-1200 mm, 79 mm high, 1.6 mm steel, total UDL 12 kN at a 3:1 load ratio and 10 kN at 19:1; 1350-1500 mm, 96 mm high, 1.8 mm steel, 14 kN and 12 kN; the range continues from 1650-1800 mm upward. Made in 150 mm length increments.
- supplier figure RN-IMDK0U
IG Lintels (Keystone Group)
L1/XHD 100 extra heavy duty lintel for 90-105 mm cavities, 102 mm outer leaf, 100 mm inner leaf. Total UDL at 3:1 and 19:1: 600-1500 mm, 162 mm high, 3.2 mm steel, 50 kN and 45 kN; 1650-1800 mm, 162 mm high, 3.2 mm, 50 kN and 45 kN; 1950-2100 mm, 199 mm high, 3.2 mm, 55 kN and 45 kN; 2250-2700 mm, 199 mm high, 3.2 mm, 50 kN. Made in 150 mm length increments.
- supplier figure RN-U0I7NA
IG Lintels (Keystone Group)
The full IG load-table book, CI/SfB Hh2 (31.9). Lintels are designed to BS 5977 Part 2 1983 and BS EN 845-2:2003, tabulated at both a 3:1 and a 19:1 inner-to-outer load ratio. L1/S 100 for 90-105 mm cavities: height 88 mm and 1.6 mm steel at 600-1200 mm giving 12 kN at 3:1 and 10 kN at 19:1, rising through 107 mm/19 kN, 125 mm/21 kN, 150 mm/23 kN, 162 mm/27 kN to 200 mm high 3.4 mm steel at 4200-4800 mm giving 27 kN and 22 kN. L1/S 110, 130 and 150 for 110-125, 130-145 and 150-165 mm cavities all run 16/22/24/27/26/25 kN at 3:1. L1/HD 100 gives 30 kN to 1500 mm and 40 kN from 1650 to 3000 mm. INT 100 solid wall lintel: 900 mm overall for a 700 mm maximum span at 7 kN, up to 1200 mm overall for a 1000 mm span at 7 kN, not suitable for floor loads. L9/SW 100 for 100-150 mm solid walls gives 6 to 10 kN. The insulation is expanded polystyrene at 0.03 W/mK, CFC and formaldehyde free. A damp proof course is required over all lintels.
- supplier figure RN-SC0GWG
Korniche (Made For Trade Ltd)
Korniche aluminium roof lantern, fixed 25 degree pitch. Smallest size 850 x 850mm; bespoke sizes up to 6m x 4m external. Largest rectangular lantern using only 4 glass units 3m x 2.5m external; largest pyramid using only 4 units 2.5m x 2.5m; largest pyramid overall 4m x 4m. All double glazed units are 28mm, argon filled, with a warm edge spacer bar. A high strength polymer insulation core runs through the whole structure as a true thermal break, with thermally isolated fasteners. PAS 24 high security as standard.
- supplier figure RN-HUH5PR
Liniar (HL Plastics)
Liniar lead-free multi-chambered uPVC window profile with a co-extruded bubble gasket, glazing flipper and thermal dam. Liniar states its window systems reach Window Energy Rating A++ and U-values as low as 1.2 W/m2K using double glazing rather than triple. The Liniar EnergyPlus range has 6 chambers and can achieve a U-value as low as 0.8 W/m2K. The range holds PAS 24 enhanced security certification and Secured by Design accreditation, with multi-point locking and reinforced frames.
- supplier figure RN-IP1H5P
Mila Hardware
the maker's own fitting and adjusting instructions for the ProSecure Pace flag hinge, which set out the three adjustments and their ranges: lateral movement of up to 5 mm in either direction using a 4 mm hex key after releasing the unlock cam, height adjustment lifting the hinge by up to 5 mm with a 5 mm hex key, and compression adjustment by pushing out the hinge pin
- supplier figure RN-T3XTD2
Naylor Concrete Products
Hi-Spec prestressed concrete lintels with a 30 minute fire rating as standard. Fourteen section sizes in widths of 100 mm, 140 mm, 190 mm and 215 mm, with lengths from 450 mm to 4800 mm depending on section. Additives and the concrete strength make them suitable for use below ground. Supplied with a textured finish for plastered or rendered work. They can be cut to length without adversely affecting performance, and each lintel is marked at the top to ensure correct orientation during installation. Fixings may be made on site provided the prestressing tendons remain undamaged. Certified to BS EN 1992-1-2:2004, BS EN 845-2:2013+A1:2016, BS EN 206:2013+A2:2021 and BS 8500-1:2015, with prestressing wire to BS 5896:2012.
- supplier figure RN-WKDF0I
Naylor Concrete Products
Naylor prestressed concrete lintels are designed to Eurocode 2 Part 1-1 and conform to BS EN 845-2:2013+A1:2016. Concrete strength 50 N/mm2 throughout the range. Standard lengths 600 mm to 3600 mm, with bespoke lengths up to 4800 mm. End bearing allowances supplied as standard: 100 mm each end for openings up to and including 1000 mm, 150 mm for openings up to and including 3000 mm, and 200 mm for openings over 3000 mm, with the designer responsible for checking these do not over-stress the masonry. Low water absorption from the dense mix means they can be used underground provided the ends are encased in a minimum 45 mm of mortar over the ends of the reinforcing strands. Camber is inherent in a prestressed element and is limited to L/250. Fixings can be made into the lintel provided the tendons are undamaged. Materials comply with BS EN 206:2013+A2:2021 and BS 8500-1:2015, prestressing wire with BS 5896:2012.
- supplier figure RN-USXUBZ
Origin Global
Origin aluminium bi-fold door systems. OB36+: 36mm sightline, U-value as low as 0.78 W/m2K. OB49: 49mm sightline, U-value up to 1.1 W/m2K. OB72: 72mm sightline, U-value up to 1.1 W/m2K. All three systems meet PAS 24; the OB49 and OB72 additionally carry police-preferred Secured by Design accreditation, which the OB36+ does not. Guarantee up to 20 years standard (10 years frame and 5 years hardware in marine environments).
- supplier figure RN-J7P2WZ
Origin Global
Origin aluminium window systems compared. OW70: 65mm sightline, whole-window U-value up to 1.2 W/m2K. OW80: 91mm sightline, U-value as low as 0.8 W/m2K when upgraded with Aerogel insulation in the profile. Tilt and Turn: 91mm sightline, U-value up to 0.83 W/m2K. All Origin windows are PAS 24 and Secured by Design accredited. Guarantee up to 20 years standard, reduced to 10 years on the frame and 5 years on hardware in a marine environment.
- supplier figure RN-342O1E
Pilkington (NSG Group)
Pilkington K Glass S is a UK-manufactured off-line coated low-emissivity glass with a neutral appearance that lets solar heat through. Pilkington states it can help windows achieve Window Energy Ratings of band A and higher across PVC-U, timber and aluminium frames, against the minimum band B required for windows in Table 4.2 of Approved Document L Volume 1. Available annealed and can be toughened or laminated without loss of performance or change of appearance. Contrast with Pilkington K Glass, the original on-line (pyrolytic hard) coated product normally used as the inner pane of a double glazed unit.
- supplier figure RN-EE56OE
Pilkington (NSG Group)
Pilkington Optitherm range of off-line coated low-e glasses for insulating glass units: Ug-values of 1.0 and 1.1 W/m2K in a double glazed IGU, calculated in accordance with EN 673. Optitherm S3 gives Ug 1.1 W/m2K in a standard IGU with very high light transmittance and neutral colour; Optitherm S1A gives Ug 1.0 W/m2K in a standard IGU with improved light transmission and total solar heat transmittance (g-value). These are centre-pane Ug figures, not whole-window Uw.
- supplier figure RN-586FDU
Pilkington (NSG Group)
Pilkington Optitherm S3, a neutral off-line (magnetron sputtered) coated low-emissivity glass. Ug-value 1.1 W/m2K in a standard 4-16-4 insulating glass unit with 90% argon fill. This is the centre-pane Ug, not the whole-window Uw, and the two are routinely confused. Light transmittance 82%, light reflectance 11%. Available from 3mm to 12mm thickness. Optitherm S3 Pro T is the toughenable version, colour matched after toughening.
- supplier figure RN-VNVK1K
Rockdoor (Masonite UK)
Rockdoor composite front door construction: a 50mm sash with a high density insulating core, tight seals, a reinforced aluminium inner frame and multi-point locking. S-Glaze technology integrates the glazing into the door slab rather than using external glazing cassettes, removing the cassette as an attack point. Many door styles meet Secured by Design standards. Rockdoor states typical installed cost for a UK composite front door is around GBP 1,500-2,000 supplied and fitted, ranging from about GBP 850 for basic installations to over GBP 3,000 for premium options.
- supplier figure RN-6C5V36
Ronseal
Manufacturer coverage and method data for an exterior wood paint. Coverage is up to 12 m2 per litre, double the 6 m2 per litre of the same maker's fence treatment because the substrate is planed rather than sawn. It is touch dry in one hour with four hours between coats. No primer is required. Ronseal's stated preparation rule is 240 grit for a light sand where the old paint is sound, and 120 grit where the paint is cracked or flaking. The protection claim is 10 years.
- supplier figure RN-5LUS12
Ronseal
Manufacturer data for a wet rot wood hardener used to consolidate rotten timber before filling. Dry time is two hours and only one coat is applied. It is clear, brush applied, and supplied in 250ml and 500ml sizes. Ronseal states it soaks deep into rotten wood to strengthen it and sets rock hard, providing a base for filling cracks and holes in doors, windows and frames, inside or outside. VOC content is declared as very high, which is the reason for ventilation and why it is not an interior job to do casually.